Resistors, capacitors, diodes, Zeners, transistors, MOSFETs, LEDs, 7-segment displays, regulators and common ICs in 3D on a breadboard, with pinouts and the key datasheet figures.
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
How it works
Pick a part from the list or search by its number. Each one stands on a breadboard in 3D at real size, with its pins named, and LEDs and displays can be lit. Below are the figures you need to choose and use it, taken from the maker’s datasheet named at the end, the pin order and the model the breadboard simulator will use. Values that change (resistance, capacitance, LED colour, voltage) are chosen above the view.
Common questions
Why does the pinout of a transistor differ from another table?
The same number is made by several companies and some change the order. The 2N2222A is the usual case: PN2222A (E-B-C) and P2N2222A (C-B-E) are both sold as 2N2222A in TO-92. The library follows the datasheet it names; check the one of the part in your hand.
Where do the simulation models come from?
Where a widely used SPICE model exists (1N4148, 1N400x) its main parameters are used. Otherwise the model is fitted to the typical figures of the datasheet: forward voltage at a current for diodes and LEDs, the middle of the hFE range for transistors, threshold and on-resistance for MOSFETs. They are good for seeing how a circuit behaves, not for squeezing the last percent out of a design.