Voltage divider on a breadboard
Step-by-step 3D breadboard guide: two resistors for the ratio you need, loaded and unloaded output, schematic and measurements.
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Step-by-step 3D breadboard guide: two resistors for the ratio you need, loaded and unloaded output, schematic and measurements.
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Choose the input voltage, the ratio you need and what the output will drive. The guide picks the closest pair of standard resistors, tells you the real output with and without the load, and shows where each resistor goes on the breadboard. The schematic and the 3D view highlight the same part at every step.
Vout = Vin · R2 / (R1 + R2) Whatever you connect to the output sits in parallel with R2 and lowers it. A meter with 1 MΩ input already matters when R1 and R2 are 100 kΩ. Choose the load option to see the loaded value.