Step-by-step 3D breadboard guide: NE555 astable with frequency and duty from R1, R2 and C, LED resistor, pin numbers and measurements.
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
How it works
Choose the supply, R1, R2 and the timing capacitor. The guide gives frequency, high and low times and duty cycle with the usual 555 astable formulas, sizes the LED resistor, and walks you through every connection of the NE555 on a breadboard with its pin numbers and notch orientation.
Formula
f = 1.44 / ((R1 + 2·R2) · C)
Common questions
Why are pins 2 and 6 tied together?
Pin 6 (threshold) ends the charge at 2/3 of the supply and pin 2 (trigger) restarts it at 1/3. Joined, both watch the capacitor and the chip keeps oscillating on its own.
Can the duty cycle be 50 %?
Not exactly: the high time is always longer than the low time because R1 is in the charge path only. It approaches 50 % when R2 is much larger than R1.