XLR 4-pin Wiring Guide

4-pin XLR for 12 V DC camera power and intercom headsets: pinout, soldering, male and female in 3D

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

The 4-pin XLR has no single pinout, so pick the application first: 12 V DC power (pin 1 ground, pin 4 +12 V) or an intercom headset (microphone on pins 1 and 2, headphone on pins 3 and 4). The guide wires one cable to the table you choose and shows the male shell sliding between the female insert and its outer sleeve.

Common questions

What is the pinout of a 4-pin XLR for camera power?

The common arrangement is pin 1 ground and pin 4 +12 V (nominal), with pins 2 and 3 unused. Older equipment sometimes differs, so check the manual and test the polarity with a meter before you connect it.

How is an intercom headset wired on a 4-pin XLR?

Clear-Com publishes pin 1 as microphone ground, pin 2 as microphone hot, pin 3 as headset ground and pin 4 as headset hot, and Telex/RTS systems use the same assignment. Other makers differ, so follow the manual of your system.

Can I use a 4-pin XLR power cable on an intercom?

No. The connector fits, but the pins mean different things, and 12 V on a microphone or headphone pin can damage the equipment. Label the cables.

Related tools