RCA Connector Wiring Guide
Solder an RCA plug step by step, with signal and ground clearly marked in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Solder an RCA plug step by step, with signal and ground clearly marked in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Rotate the 3D RCA plug and follow the steps to solder the coax core to the centre pin and the braid to the sleeve. The same plug is used for line-level audio, composite video and S/PDIF coaxial digital audio; only the cable changes, with 75 Ω coax for video and S/PDIF.
The outer sleeve is ground and cable shield; the centre pin carries the signal. Solder the coax core to the pin and the braid to the sleeve lug.
S/PDIF coax is specified for a 75 Ω cable with the same RCA plugs. An ordinary audio cable often works over short runs, but it is not guaranteed; use 75 Ω coax for reliability.