Jack TRS / TS Wiring Guide

Wire 6.35 mm and 3.5 mm jacks: mono, stereo and balanced, with a rotatable 3D model

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

Choose balanced TRS, stereo TRS or mono TS, rotate the 3D plug and follow the steps to solder the tip, ring and sleeve. The same wiring applies to 6.35 mm (¼") and 3.5 mm (⅛") plugs. What changes between the variants is only what the ring carries: the cold signal, the right channel, or nothing.

Common questions

What is the difference between TS and TRS?

A TS plug has two contacts, tip and sleeve, and carries one unbalanced signal. A TRS plug has a third contact, the ring, and carries either a balanced mono signal or an unbalanced stereo pair, depending on how the equipment uses it.

Do 6.35 mm and 3.5 mm plugs use the same wiring?

Yes. Tip, ring and sleeve have the same meaning on both sizes. Only the size of the plug and of its solder lugs differs.

Can I plug a TS cable into a balanced TRS input?

It works, but the TS plug shorts the ring to the sleeve, so the input becomes unbalanced and loses its noise rejection. It is fine for short runs.

Related tools