RJ45 Ethernet Wiring Guide (T568A / T568B)
Pinout, color order and crimping steps for straight and crossover Ethernet cables
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Pinout, color order and crimping steps for straight and crossover Ethernet cables
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Pick T568B, T568A or crossover and rotate the 3D RJ45 plug to see which colour goes into each of the eight pins. The steps follow a crimped cable from stripping the jacket to testing. T568A and T568B differ only in the swapped orange and green pairs, so both ends of a normal cable must use the same one.
Both work the same electrically. T568B is the most common in new installations in many countries; use whichever the existing cabling uses, and wire both ends of a cable identically.
Rarely. Gigabit equipment and most modern 10/100 ports use auto MDI/MDI-X and correct the crossing themselves, so a normal cable connects two PCs. A crossover is only needed for old gear without it.
Each pair carries one differential signal. Pins 3 and 6 are one pair even though pin 4 and 5 sit between them, which is why wiring in plain order (a split pair) increases crosstalk and errors.