VGA (DE-15) Wiring Guide
VGA / HD15 pinout with DDC: red, green, blue, returns, sync and I²C, plug and socket in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
VGA / HD15 pinout with DDC: red, green, blue, returns, sync and I²C, plug and socket in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Follow the steps to build a VGA cable on a DE-15 (HD15) plug: three small coaxes for red, green and blue, each with its own return, plus the two sync wires and the DDC lines that let the computer read the monitor. The model shows the three rows of five pins and how the socket shell slides inside the plug shell.
Pins 1, 2 and 3 are red, green and blue video, with their returns on pins 6, 7 and 8. Pin 5 and pin 10 are grounds, pin 13 is horizontal sync and pin 14 is vertical sync. Pins 12 and 15 are the DDC data and clock, pin 9 is +5 V, and pins 4 and 11 are reserved.
The computer reads the monitor’s resolution table through the DDC lines. If pin 12 (data), pin 15 (clock), pin 9 (+5 V) or a ground is not connected, it cannot read it and falls back to a default.