USB-C Connector Pinout and Wiring Guide

USB-C 24-pin receptacle and 2.0 cable plug: CC, VBUS, D+/D-, SBU in 3D

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

Pick a view: the pins a USB 2.0 cable plug uses, or the full 24-pin receptacle by function. The plug is symmetrical (row A and row B repeat the signals rotated by 180°) and a cable carries one CC wire, while the other CC pin becomes VCONN. The steps cover wiring a USB 2.0 plug and setting the CC resistors.

Common questions

Why does a USB-C cable have only one CC wire?

The plug is reversible, so the receptacle has two CC pins (A5 and B5), but only one of them lines up with the cable’s CC contact in any given orientation. The other contact in the plug is VCONN, which powers the e-marker chip in cables that have one. The host detects the orientation from which CC pin sees the cable.

What resistors does USB-C use on the CC pins?

A device that takes power has 5.1 kΩ (Rd) from each CC pin to ground. A source advertises current with a pull-up (Rp): 56 kΩ for default USB power, 22 kΩ for 1.5 A or 10 kΩ for 3 A. A USB-A to USB-C cable uses 56 kΩ.

Can I make my own USB-C cable?

Yes for USB 2.0: breakout plugs with power, one D+/D− pair and CC are common. Fast data, video or 5 A need a full-featured, e-marked cable that is not practical to build by hand. Always check VBUS to GND for shorts before connecting a source.

Related tools