TRRS 3.5 mm Wiring Guide (CTIA / OMTP)
Headset and mic jack wiring, CTIA vs OMTP, with a rotatable 3D model
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Headset and mic jack wiring, CTIA vs OMTP, with a rotatable 3D model
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Pick CTIA or OMTP and follow the steps to solder a 4-pole 3.5 mm plug. Both put left on the tip and right on ring 1; they differ only in ring 2 and the sleeve, which swap ground and microphone. The pinout highlights each contact as you work.
In CTIA (also called AHJ) ring 2 is ground and the sleeve is the microphone; in OMTP ring 2 is the microphone and the sleeve is ground. Left and right (tip and ring 1) are the same in both. CTIA is the one used by Apple and by most current phones.
The usual cause is a CTIA headset in an OMTP device, or the reverse: sound still plays because left and right are in the same place, but the microphone is on the wrong contact. A CTIA/OMTP adapter, which swaps ring 2 and the sleeve, fixes it. Also check that the jack is a headset jack and not output only.
Yes for listening: left and right are on the tip and ring 1 either way. There is no microphone, and the longer sleeve of the plug may touch the ring 2 and sleeve contacts of the jack. Depending on the device, that can be treated as the headset being absent.