TOSLINK Optical Connector Guide
TOSLINK optical S/PDIF: plug and jack, the key, cable length and bend limits, in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
TOSLINK optical S/PDIF: plug and jack, the key, cable length and bend limits, in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
TOSLINK carries digital audio as red light through a 1 mm plastic fibre, so there is nothing to solder and no polarity. This guide covers the plug and the jack, the bevelled key that decides the orientation, cable length and bend limits, the red light you should see, and how to unplug and cap the ends.
That is the signal. The output jack sends audio as red light with a peak at 650 nm, and the fibre carries it to the receiver. If you see no light with the source playing, the output is off, the format is not set, or the cable is broken.
Usually up to 5 m, with a technical maximum of about 10 m. Tight bends can make it fail temporarily or damage it for good, so keep the curves wide.