Speakon NL4 Wiring Guide
Speakon NL2 and NL4 pinout for speaker cables, 1+/1- and 2+/2-, in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Speakon NL2 and NL4 pinout for speaker cables, 1+/1- and 2+/2-, in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Choose NL4 or NL2 and follow the steps to wire the cable plug, with each terminal highlighted in 3D. On an NL4, 1+ and 1− are the pair for a single speaker, and 2+ and 2− carry a second line. The poles are the number in the name: NL2 has 2, NL4 has 4 and NL8 has 8 (NL8 is not covered here).
Use 1+ and 1−. Pins 2+ and 2− are for a second line on the same cable, for example a second speaker or a bi-amplified one, and stay empty on a two-conductor cable.
The number of poles: 2, 4 and 8. NL2 carries one speaker line (1+, 1−), NL4 carries two (1+, 1−, 2+, 2−) and NL8 carries four. Check that the plug and the receptacle are of compatible series before connecting.
Push the plug in and turn it clockwise until the latch clicks. To release, press the latch lever and turn it back.