HDMI Connector Pinout Guide

HDMI type A 19-pin pinout: TMDS, DDC, CEC, HPD, with a rotatable 3D model

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

This is a pinout reference and a test sequence, not an assembly guide: HDMI cables are not built by hand in practice. It lists the 19 pins of the Type A connector by number and shows, step by step, how to find pin 1, check +5 V, Hot Plug Detect, the DDC lines and CEC, and where a multimeter stops being useful.

Common questions

What is the HDMI Type A pinout?

Pins 1 to 3 are TMDS Data2 (+, shield, −), 4 to 6 Data1, 7 to 9 Data0 and 10 to 12 the clock. Then 13 CEC, 14 reserved/utility, 15 SCL, 16 SDA, 17 DDC/CEC ground, 18 +5 V and 19 Hot Plug Detect.

Why is there no signal when HDMI is connected?

The source only sends video when the display raises Hot Plug Detect (pin 19) and the source can read the EDID over the DDC lines (pins 15 and 16). A cable that breaks one of those, or a missing +5 V on pin 18, gives no signal even though the plugs are in. Try a different cable and port first.

Can I test an HDMI cable with a multimeter?

You can check continuity and shorts pin by pin, ideally with a Type A breakout adapter, which finds broken or shorted wires. It cannot show that the high-speed pairs will carry 4K or 8K: that needs a certified cable or a cable tester.

Related tools