DisplayPort Connector Pinout Guide
DisplayPort 20-pin pinout: main link lanes, AUX channel, hot plug, in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
DisplayPort 20-pin pinout: main link lanes, AUX channel, hot plug, in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
This is a pinout reference and a test sequence, not an assembly guide: DisplayPort cables are not built by hand in practice. It lists the 20 pins by number (four Main Link lanes, AUX, Hot Plug Detect, CONFIG1/2, DP_PWR) and shows how to check what a multimeter can check.
Pins 1/3, 4/6, 7/9 and 10/12 are the Main Link lanes 0 to 3 (+/−), with grounds on 2, 5, 8 and 11. Pins 13 and 14 are CONFIG1 and CONFIG2, 15 and 17 the AUX channel (+/−) with ground on 16, 18 Hot Plug Detect, 19 return and 20 DP_PWR (3.3 V).
DP_PWR is a 3.3 V supply from the source, with its return on pin 19, to power active adapters and active cables. It is limited to a small current, so it is not a general power source.
Mini DisplayPort has the same 20 signals as the full-size connector, so a passive mini-to-full-size cable connects pin to pin by function. Only the shape of the connector changes.