DB25 Connector Wiring Guide
DB25 pinout and soldering: 8-channel analog audio (AES59 / Tascam), RS-232 serial and PC parallel port, male and female in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
DB25 pinout and soldering: 8-channel analog audio (AES59 / Tascam), RS-232 serial and PC parallel port, male and female in 3D
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Pick the wiring first: analogue audio (AES59 / Tascam, 8 channels), RS-232 serial (DTE) or the PC parallel port, because the same DB25 is used for all three and they are not compatible. The pin table, the colours and the 3D model follow your choice, and the model shows how the smaller female shell slides inside the male shell.
It is the AES59 layout, the same as the Tascam analogue one. Channel 1 is pin 24 (hot) and pin 12 (cold), channel 2 is 10 and 23, channel 3 is 21 and 9, channel 4 is 7 and 20, channel 5 is 18 and 6, channel 6 is 4 and 17, channel 7 is 15 and 3, and channel 8 is 1 and 14. Pins 2, 5, 8, 11, 16, 19, 22 and 25 are ground, and pin 13 is not connected.
By the RS-232 standard the DTE (computer or terminal) uses the male connector and the DCE (modem) the female. The PC parallel port is the opposite: a female DB25 on the computer, so the cable end is male.
The female shell fits inside the male shell. For the DB25 the male shell is about 38.96 mm wide and the female one about 38.38 mm, from manufacturer drawings.