Timecode Calculator

SMPTE timecode: convert, add, subtract and re-frame, with exact drop-frame

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

Timecode is a label on each frame, not a clock. At 29.97 fps the counter counts 30 frames per “second”, so after one hour it is 3.6 s behind the wall clock; drop-frame fixes that by skipping labels 00 and 01 (04 at 59.94) at the start of every minute except each tenth minute, which removes 108 labels per hour (216 at 59.94). Every calculation here goes through the absolute frame count, so drop-frame, the 24-hour wrap and the different rates stay exact.

Formula

DF frames = 30·(3600h + 60m + s) + f − 2·(60h + m − floor((60h + m)/10)) real time = frames · 1001 / 30000 sample = real time · fs

Common questions

Why is 00:01:00;00 an error?

In drop-frame at 29.97 the labels 00 and 01 do not exist at the start of a minute unless the minute is 00, 10, 20, 30, 40 or 50. The frame after 00:00:59;29 is 00:01:00;02. At 59.94 DF the skipped labels are 00 to 03.

Does drop-frame drop picture?

No. It only skips numbers in the count so that the timecode follows the wall clock; every frame is still there. Over one hour the remaining error is about 3.6 ms.

Related tools