Installation Diagrammer
Draw audio, DMX, network and power systems, and let it check the connections, loads and addresses
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Draw audio, DMX, network and power systems, and let it check the connections, loads and addresses
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Drag symbols from the palette, then drag from one port to another to draw a cable. The diagram knows what each port carries (mic, line or speaker level, AES, Dante, DMX512, Art-Net, Ethernet, mains) and checks the connections as you draw: speaker level into a line input, a speaker load below the amplifier minimum, DMX addresses past channel 512, a DMX line without terminator, Dante on a 100 Mbit link, a breaker above its rating. The checks are heuristics and rules of thumb to catch common mistakes; they help, but they do not certify a design. Everything runs in your browser and the project is a file you keep (.nkdiagram.json), with SVG, PNG and PDF export and a cable schedule in CSV.
No. It applies common rules of thumb (32 unit loads per DMX line, about 300 m of DMX cable, 100 m of copper Ethernet, 80 % continuous load on breakers, an amplifier modelled as a voltage source) to the values you enter. Real limits depend on the cable, the devices and the standards that apply where you work, so treat a clean result as "no obvious mistake found", not as an approval.
Nowhere on our side: there is no account and nothing is uploaded. Use Save to download a .nkdiagram.json file and Open to load it again. The editor also keeps the last diagram in this browser so a reload does not lose your work, but that copy is not a backup.
Yes. Tap a symbol in the palette to place it, tap one port and then another to connect them, pinch to zoom and drag the background to pan. The Connect dialog connects two ports from lists, which also works with the keyboard alone.