DMX Patch Calculator
Address fixtures across universes, check overlaps, refresh rate and Art-Net load
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Address fixtures across universes, check overlaps, refresh rate and Art-Net load
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
A DMX universe carries 512 channels. Fixtures are placed one after another; with “never split” on, a fixture that would cross channel 512 jumps to address 1 of the next universe, which is how consoles and nodes expect it. Manual addresses (“@ 3/120”) are placed where you say and checked against everything else for overlaps. The refresh rate follows from the packet length: 22.7 ms for a full universe, about 44 Hz.
packet = 92 µs + 12 µs + 44 µs × (1 + n) refresh = 1 / packet ArtDmx = 18 + n bytes UDP (n even) DMX512 runs at 250 kbit/s and each slot takes 44 µs (11 bits). A full packet is a break, a mark after break, a start code and 512 slots: about 22.7 ms. Sending fewer slots shortens the packet, but only if the controller supports it.