Room Designer (3D)
Draw a room of any shape, place doors, windows and furniture to scale, and see it in 3D with overlap and clearance checks
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Draw a room of any shape, place doors, windows and furniture to scale, and see it in 3D with overlap and clearance checks
🔒 Your data stays in your browser: nothing you type or upload is sent to a server.
Draw a room as a plan and see it in 3D. Start from a rectangle, an L, a U or a T, then drag the corners to reshape the walls, click the dot on a wall to add a corner, or click a wall and type its exact length. Place doors and windows on the walls, then add furniture and equipment with real sizes (desks, sofas, beds, wardrobes, server racks, a PC tower or a monitor on a desk) and drag, turn or edit each one. The tool snaps pieces to a 5 cm grid and back-first against the nearest wall, flags anything that overlaps another piece or sticks out of the room, checks that doors have the space they sweep when they open and that furniture and racks keep the free space wanted in front of them, and shows the floor area, volume and how much floor is taken. The 3D view fades the walls in front of the camera so you can see inside. Choose the finishes (tiles with their size, layout, look and grout, a wood floor, paint by type, colour and sheen, wall tiles up to a height, an accent wall) and they are drawn at real scale while the tool writes the shopping list: tile boxes counted on the actual layout with every cut piece, adhesive and grout, litres and cans of paint per colour, primer, underlay and skirting. For a new build, turn on the construction of the walls: pick hollow brick, solid brick or concrete block, the joint, the mixes and which faces get plaster, and it adds the units, cement, lime and sand, with the walls drawn at their real thickness. The plan is saved in this browser and can be downloaded as a file. Sizes are typical values: measure your room and your furniture before you buy or move anything.
area = polygon area (shoelace) volume = area x ceiling height a piece fits when all of it is inside the outline and it overlaps no other piece that shares its height range Yes. The room is a polygon: start from a rectangle, L, U or T and move, add or remove corners until it matches your floor plan. Walls cannot cross each other, and each wall has to be at least 20 cm long, because the 3D walls and the checks need a clean outline. Curved walls, columns inside the room and sloped ceilings are not supported.
The tool asks for a free strip in front of each piece: about 80 cm at a desk, 60 to 70 cm at a wardrobe or a bed, 60 cm for a sofa or a table, and 100 cm in front of a server rack so a person can work at it and the equipment can be pulled out. Those are comfortable rules of thumb, not legal minimums; local building rules, accessibility rules and the manufacturer of the equipment can ask for more. Chairs may stand in the strip of the desk or table they belong to, and the strip a door sweeps must stay empty.