PC Won’t Start: POST Diagnosis

From a symptom, a CPU / DRAM / VGA / BOOT light or a beep pattern to the checks to try, cheapest first

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

Pick what you observe (a symptom, a debug light on the board or a beep pattern) and the page lists the generic checks in order, from the cheapest and most common cause to the least. The beep list covers legacy AMI patterns only; boards from other makers or recent UEFI boards often differ, so use it as a starting point and confirm with the manual.

Common questions

What do the CPU, DRAM, VGA and BOOT lights mean?

Many current motherboards light them in sequence while they start. The one that stays on marks the stage where the start-up stopped: processor, memory, graphics or boot device. That narrows the search before you start swapping parts.

My PC makes no beep at all. Is that a fault?

Not necessarily. Many cases no longer include the small speaker, and without it the board cannot beep even when it detects an error. A cheap buzzer on the speaker header of the board brings the codes back.

The screen stays black after I added RAM. Should I wait?

Yes, give it a few minutes. After a memory change, recent boards (especially DDR5) retrain the memory and can stay on a black screen for a while on the first start. If it never starts, clear the CMOS and try one module at a time.

Related tools