3D model viewer

Open STL, 3MF, OBJ or a whole ZIP in your browser with no upload: measure, scale, recolor, lay flat and export

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

Drop an STL, 3MF or OBJ file, or a whole ZIP as downloaded from Thingiverse, Printables or Thangs, and the model is drawn in your browser. The file is read and analysed on your device: nothing is uploaded, and once the page has loaded it works offline. A ZIP is opened to list every part with its own checkbox, plus the photos and the README text. Orbit with the left button or one finger, pan with the right button or two fingers, zoom with the wheel or a pinch. Sizes are in millimeters, and a warning appears when the model looks like inches or meters, with a one-click fix. Volume and weight are estimates for a solid part, and the health badge counts open edges and degenerate triangles.

Formula

mm = inches x 25.4 mm = meters x 1000 weight (g) = volume (cm3) x density (g/cm3) PLA 1.24, PETG 1.27, ABS 1.04, resin 1.1

Common questions

How can I open an STL file online without uploading it?

Drag the .stl file onto the viewer or press Open files. Binary and ASCII STL are both supported, including binary files whose header starts with the word "solid", which fools many viewers. The mesh is read by a Web Worker in your browser and drawn with WebGL, so the file never leaves your device. Models of one or two million triangles open in a few seconds on a normal computer. Files above 300 MB or 6 million triangles are refused on purpose to protect your browser memory.

Can I view a Thingiverse ZIP without unzipping it?

Yes. Drop the ZIP and every STL, 3MF and OBJ inside becomes a part in the side list, each with a checkbox, a solo button and a click to focus. Photos (JPG, PNG, WebP) go to a small gallery and README.txt, README.md or any other text file is shown next to them. To keep your browser safe, archives are refused if they have more than 4000 entries or expand beyond 600 MB. Nested ZIPs are ignored.

My model looks tiny or huge. Is it in inches or meters?

STL and OBJ files carry no unit, so the viewer reads the numbers as millimeters, which is what slicers assume. If the largest side is under 5 mm the file is probably in inches (multiply by 25.4) or meters (multiply by 1000); above 2000 mm it is probably micrometers (multiply by 0.001). The Info panel shows the warning with one-click buttons, and the scale field in Move accepts any percentage. 3MF files do declare their unit and are converted to millimeters automatically. Exported STL and OBJ files include the scale you applied.

How accurate are the volume, the weight and the "watertight" badge?

The volume is exact for a closed mesh and meaningless for an open one. The weight multiplies it by a typical density (PLA 1.24, PETG 1.27, ABS 1.04, resin 1.1 g/cm3) and assumes a solid part at 100% infill, so a real print with walls and infill weighs much less. The badge only counts edges used by one triangle (open) or by more than two (non-manifold), and triangles with no area. It does not detect self-intersections or thin walls, and a slicer can still reject a file that passes. Use it as a quick hint, not as a printability check.

Related tools