Connector pinout trainer

Drill XLR, TRS, DB9 RS-232, RJ45 T568A/B and more: what each pin carries, with match mode and spaced repetition.

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

Pick the connectors you want to drill (XLR, TRS and TRRS jacks, DB9 and DB25 RS-232, RJ45 T568A and T568B, MIDI DIN, DMX XLR5, Speakon and more) and answer what each pin carries, which pin carries a signal, or which wire colour belongs on a pin. A match mode pairs pins with signals or wire colours. Every question is generated from the same pinout data as the connector guides, and after each answer the full pinout is shown. Pins you miss come back after two questions; the ones you get right come back later.

Common questions

Which pin is hot on an XLR?

Pin 1 is shield or ground, pin 2 is hot (+, in phase) and pin 3 is cold (−, inverted) in the usual balanced wiring. The quiz asks exactly this, plus the equivalent for TRS (tip hot, ring cold, sleeve ground).

Does the quiz cover RS-232 on a DB9?

Yes, the PC (DTE) pinout: pin 2 RXD, pin 3 TXD, pin 5 GND, pins 7 and 8 RTS and CTS. RS-485 over DB9 is not asked because there is no universal pinout for it.

Related tools