LUFS loudness meter

Measure LUFS, loudness range and true peak of an audio file in your browser (EBU R128)

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

The audio is decoded by your browser and measured locally following ITU-R BS.1770-4: a two-stage K-weighting filter (head-shelf plus high-pass, with coefficients derived for the file’s own sample rate), channel weighting (surrounds +1.5 dB, LFE ignored), 400 ms blocks with 75 % overlap, then the −70 LUFS absolute gate and the −10 LU relative gate give the integrated loudness. Loudness range follows EBU Tech 3342 on 3 s windows, and true peak comes from 4× oversampling, so it can read above the highest sample.

Formula

LUFS = −0.691 + 10·log10( Σ Gi · mean(yi²) )

Common questions

Does my file leave my computer?

No. Decoding and every measurement run in your browser; nothing is uploaded or stored.

Why can the true peak be higher than the sample peak?

Between two samples the reconstructed waveform can swing higher than either one. When the file is converted to analog or to a lossy codec, those inter-sample peaks can clip, which is why delivery specs set a dBTP ceiling such as −1.

Why does my number differ slightly from another meter?

Compressed files (MP3, AAC) decode slightly differently between players, and the browser resamples everything to 48 kHz. Integrated loudness should agree within a few tenths of a LU; LRA and true peak depend more on the implementation.

Related tools