Resistor colour code trainer

Read 4, 5 and 6-band resistors against the clock, or place the bands for a value. Tolerance and tempco included.

🔒 Your data stays in your browser: nothing you type or upload is sent to a server.

How it works

A resistor is drawn with 4, 5 or 6 bands. Read the value, the tolerance or the temperature coefficient, or do the reverse and place the colour bands for a given value. In 4-band parts the first two bands are digits, the third is the multiplier and the fourth the tolerance; 5 and 6-band parts have three digits, and the 6-band ones add a temperature-coefficient band. The timed mode gives you 60 seconds and keeps your best score on this device only.

Common questions

How do I know which end to start reading from?

Start from the end where the bands are closer together; the tolerance band (gold or silver on 4-band parts) is set apart from the others at the far end. If the first band would be gold or silver, you are reading backwards, because those colours are never a digit.

Which temperature-coefficient colours does the quiz use?

Brown 100, red 50, orange 15, yellow 25, blue 10 and violet 5 ppm/K. Black, green and grey are left out because manufacturers disagree on them, so for a real part always check the datasheet. The same goes for the grey tolerance (0.05 %) and the pink multiplier, which are not asked either.

Why are some values never asked, like 4.8 kΩ?

Questions use preferred values: E12 or E24 for 4-band parts and E24 or E96 for 5 and 6 bands, the series that real resistors are made in. 4.8 kΩ is not in E12, E24 or E96 (4.7 kΩ and 4.87 kΩ are).

Related tools